Accessories for Enclosures

Accessories for Enclosures E1 & E2 – Mounting Base & Panels

Accessories for GenMet Metal Electrical Enclosures E1 & E2 Mounting Bases & Mounting Panels

Mounting Bases for pad or floor

Pad / Floor Mounting Bases GenMet Series E1 metal Enclosures are equipped with pem nuts located in bottom for easy addition of optional mounting bases.

GenMet

GenMet offers Accessories for Enclosures.  Optional Mounting Bases are a convenient means of enabling enclosures to stand upright on a floor or concrete pad.  The standard mounting base kit adds 6” to the enclosure height and contains two (2) foot mounting brackets plus the 1/4 inch zinc plated steel hardware for use in securing each base to the bottom of the enclosure. The installer must also properly secure the enclosure with mounting base to the concrete pad or floor. Use these kits to maintain Type 3R integrity of E2 enclosures also when using feet for mounting on surfaces outdoors.

 

Floor/Pad Mounting Kit
Enclosure Catalog No.
E1-6 FM1-E1
E1-8
E1-10 FM2-E1
E1-12
E1-14 FM3-E1
E1-18 FM4-E1
E1-22

General Purpose Enclosures Series E1 Mounting Bases
Optional mounting bases may be ordered as a kit or may be factory installed. (consult factory)  Each mounting base kit contains two brackets plus the fasteners necessary to secure the enclosure to the base.

 

 

 

 

 

 


Optional Panels for GenMet Metal Electrical Enclosures E1 & E2

Enclosure Panels

Enclosure Panels
Full Panel
Half Panel
Quarter Panel

Select optional panels for mounting your components in our E1 series of enclosures in the horizontal or vertical mounting planes. Most enclosures offer three sizes: full size, half size or quarter size panels. The half panel can be mounted in either the bottom (horizontal) or rear (vertical) portion of the enclosure. Panels for E2 enclosures are listed at center of page.  For convenience, you may combine both a bottom and a back panel.

Approximate Panel Dimensions (inches)
“add 6 inches for TALL versions”

Catalog No. A B C D Approx.
Wt
Lbs / kg
Mounting Panels

Panels Optional – Internal Mounting Panels

 

Full Panel  (P4) For E1  only

P4-E1-6 5.28 7.94 4.33 O.C. 0.9 / 0.4
P4-E1-8 6.79 8.95 5.84 5.00 1.0 / 0.5
P4-E1-10 8.78 11.36 7.83 8.56 1.9 / 0.9
P4-E1-12 10.78 15.36 9.83 9.85 3.1 / 1.4
P4-E1-14 12.78 18.61 11.83 16.50 4.4 / 2.0
P4-E1-18 16.78 23.36 15.83 20.00 7.1 / 3.2
P4-E1-22 20.78 27.36 19.83 25.50 10.2 / 4.6

1/2 Panel  (P2) For E1 and *E2  

P2-E1-6 5.23 4.83 Centered 4.50 0.6 / 0.28
P2-E1-8 6.78 5.90 5.83 5.00 0.7 / 0.32
* P2-E1-10 8.78 6.50 7.83 4.28 1.1 / 0.5
* P2-E1-12 10.78 7.79 9.83 6.65 1.6 / 0.7
* P2-E1-14 12.78 9.49 11.83 8.25 2.3 / 1.1
* P2-E1-18 16.78 10.90 15.83 10.00 3.4 / 1.6
P2-E1-22 20.53 10.90 19.58 8.51 4.3 / 1.9

1/4 Panel  (P1) For E1 only

P1-E1-12 10.78 4.29 9.83 4.13 1.0 / 0.5
P1-E1-14 12.78 5.09 11.83 5.00 1.3 / 0.6
P1-E1-18 16.78 5.97 15.83 4.25 2.0 / 0.9
P1-E1-22 20.78 6.15 19.83 4.50 2.6 / 1.2